FIOR & GENTZ offers practical workshops on the production of a KAFO. The basis for this is 360° orthotics, i.e. the concept of successive work steps from the physical examination to the handover of the orthosis and the subsequent maintenance. By adhering to a predefined system, the reproducibility and quality of the work is guaranteed.

You can choose between the following three practical workshops:

1. On-Site Workshop With Patient Treatment: you will produce a KAFO for your patient. The entire workshop will take place at the FIOR & GENTZ technology centre in Lüneburg. Both the orthotist and the patient must be present during the workshop.
2. Hybrid Workshop With Patient Treatment: you will produce a KAFO for your patient. The physical examination and the handover of the orthosis take place in your workshop with the patient present. The workshop instructor will support you online. The work steps model technology and production of the orthosis are carried out in the FIOR & GENTZ technology centre in Lüneburg. The patient does not have to be present for this.
3. Online Workshop With Patient Treatment: you will produce a KAFO for your patient. The entire workshop will take place in your workshop. The workshop instructor will support you online. The patient must be present for the physical examination and the handover of the orthosis.